CATEGORIES
Topic Topic description Division Division description Aero. / Avia. Water. / Mar. Auto. / Road Rail Urb. Mob. / Smart Cit. Fr. / Log. Other / C.-C.
ART-01-2017 ICT infrastructure to enable the transition towards road transport automation EU.3.4. Smart, green and integrated transport
ART-02-2016 Automation pilots for passenger cars EU.3.4. Smart, green and integrated transport
ART-03-2017 Multi-Brand platooning in real traffic conditions EU.3.4. Smart, green and integrated transport
ART-04-2016 Safety and end-user acceptance aspects of road automation in the transition period EU.3.4. Smart, green and integrated transport
ART-05-2016 Road infrastructure to support the transition to automation and the coexistence of conventional and automated vehicles on the same network EU.3.4. Smart, green and integrated transport
ART-06-2016 Coordination of activities in support of road automation EU.3.4. Smart, green and integrated transport
ART-07-2017 Full-scale demonstration of urban road transport automation EU.3.4. Smart, green and integrated transport
CS2-GAM-2018-AIR Airframes EU.3.4.5.4. ITD Airframe
CS2-GAM-2018-ECO Eco Design Transverse Activity EU.3.4.5.8. ECO Transverse Area
CS2-GAM-2018-ENG Engines EU.3.4.5.5. ITD Engines
CS2-GAM-2018-FRC Fast Rotorcraft EU.3.4.5.3. IADP Fast Rotorcraft
CS2-GAM-2018-LPA Large Passengers Aircraft EU.3.4.5.1. IADP Large Passenger Aircraft
CS2-GAM-2018-REG Regional Aircraft EU.3.4.5.2. IADP Regional Aircraft
CS2-GAM-2018-SAT Small Air Transport Transverse Activity EU.3.4.5.7. Small Air Transport (SAT) Transverse Area
CS2-GAM-2018-SYS Systems EU.3.4.5.6. ITD Systems
CS2-GAM-2018-TE2 Technology Evaluator EU.3.4.5.9. Technology Evaluator
DT-ART-01-2018 Testing, validation and certification procedures for highly automated driving functions under various traffic scenarios based on pilot test data EU.3.4. Smart, green and integrated transport
DT-ART-02-2018 Support for networking activities and impact assessment for road automation EU.3.4. Smart, green and integrated transport
DT-ART-03-2019 Human centred design for the new driver role in highly automated vehicles EU.3.4. Smart, green and integrated transport
DT-ART-04-2019 Developing and testing shared, connected and cooperative automated vehicle fleets in urban areas for the mobility of all EU.3.4. Smart, green and integrated transport
FCH-01.1-2014 Standardization of components for cost-efficient fuel cell systems for transportation applications EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01.1-2015 Low cost and durable PEMFCs for transport applications EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01.2-2014 Cell and stack components, stack and system manufacturing technologies and quality assurance EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01.2-2015 Diagnostics and control for increased fuel cell system lifetime in automotive applications EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01.3-2014 Development of advanced fuel cell systems and system components EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01.3-2015 Development of Industrialization-ready PEMFC systems and system components EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01.4-2014 Hydrogen storage standardisation and components optimization for mass production EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01.4-2015 Adaptation of existing fuel cell components and systems from road to non-road applications EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01.5-2014 Development of cost effective and reliable hydrogen refuelling station components and systems for fuel cell vehicles EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01.5-2015 Develop technologies for achieving competitive solutions for APU transport applications based on existing technology EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01.6-2014 Engineering studies for large scale bus refuelling EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01.7-2014 Large scale demonstration of refuelling infrastructure for road vehicles EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-10-2016 Validation of fuel cell urban trucks and related infrastructure EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-1-2016 Manufacturing technologies for PEMFC stack components and stacks EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-1-2017 Development of fuel cell system technologies for achieving competitive solutions for aeronautical applications EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-1-2018 Large Scale Demonstration of H2 fueled HD Trucks with High Capacity Hydrogen Refueling Stations (HRS) EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-2-2016 Standardisation of components for cost-efficient fuel cell systems for automotive applications EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-2-2018 Demonstration of Fuel Cell applications for mid-size passenger ships or inland freight EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-3-2016 PEMFC system manufacturing technologies and quality assurance EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-3-2017 Improvement of compressed storage systems in the perspective of high volume automotive application EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-3-2018 Strengthening of the European supply chain for compressed storage systems for transport applications EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-4-2016 Development of industrialization-ready PEMFC systems and system components EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-4-2017 Demonstration of FC material handling and industrial vehicles EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-4-2018 Fuel cell systems for the propulsion of aerial passenger vehicle EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-5-2016 Develop new complementary technologies for achieving competitive solutions for marine applications EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-5-2017 Large scale demonstration in preparation for a wider roll-out of fuel cell bus fleets (FCB) including new cities – Phase two EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-6-2016 Develop new complementary technologies for achieving competitive solutions for rail applications EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-6-2017 Large scale demonstration of Hydrogen Refuelling Stations and Fuel Cell Electric Vehicle (FCEV) road vehicles operated in fleet(s) EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-7-2016 Improvement of compressed storage systems and related manufacturing processes in the perspective of automotive mass production EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-7-2017 Validation of Fuel Cell Trucks for the Collect of Urban Wastes EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-7-2018 Improvement of innovative compression concepts for large scale transport applications EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-8-2016 Development of innovative hydrogen compressor technology for small scale decentralized applications for hydrogen refuelling or storage EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-01-9-2016 Large scale validation of fuel cell bus fleets EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-03.1-2015 Large scale demonstration of Hydrogen Refuelling Stations and FCEV road vehicles - including buses and on site electrolysis EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-03-1-2018 Developing Fuel Cell applications for port/harbour ecosystems EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-04.1-2015 Recycling and Dismantling Strategies for FCH Technologies EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-04-1-2018 PNR for safety of hydrogen driven vehicles and transport through tunnels and similar confined spaces EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-04-2-2017 Harmonisation of hydrogen gas trailers EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
FCH-04-4-2018 Strengthening public acceptance and awareness of FCH-technologies by educating pupils at schools EU.3.4.6.1. Reduce the production cost of fuel cell systems to be used in transport applications, while increasing their lifetime to levels which can compete with conventional technologies
GALILEO-1-2017 EGNSS Transport applications EU.3.4.1.2. Developing smart equipment, infrastructures and services
GALILEO-1-2017 EGNSS Transport applications EU.3.4.2.2. Substantial improvements in the mobility of people and freight
GALILEO-2-2017 EGNSS mass market applications EU.3.4.2.2. Substantial improvements in the mobility of people and freight
GV-01-2017 Optimisation of heavy duty vehicles for alternative fuels use EU.3.4. Smart, green and integrated transport
GV-02-2016 Technologies for low emission light duty powertrains EU.3.4. Smart, green and integrated transport
GV-03-2016 System and cost optimised hybridisation of road vehicles EU.3.4. Smart, green and integrated transport
GV-04-2017 Next generation electric drivetrains for fully electric vehicles, focusing on high efficiency and low cost EU.3.4. Smart, green and integrated transport
GV-05-2017 Electric vehicle user-centric design for optimised energy efficiency EU.3.4. Smart, green and integrated transport
GV-06-2017 Physical integration of hybrid and electric vehicle batteries at pack level aiming at increased energy density and efficiency EU.3.4. Smart, green and integrated transport
GV-07-2017 Multi-level modelling and testing of electric vehicles and their components EU.3.4. Smart, green and integrated transport
GV-08-2017 Electrified urban commercial vehicles integration with fast charging infrastructure EU.3.4. Smart, green and integrated transport
GV-09-2017 Aerodynamic and flexible trucks EU.3.4. Smart, green and integrated transport
GV-10-2017 Demonstration (pilots) for integration of electrified L-category vehicles in the urban transport system EU.3.4. Smart, green and integrated transport
GV-11-2016 Stimulating European research and development for the implementation of future road transport technologies EU.3.4. Smart, green and integrated transport
GV-1-2014 Next generation of competitive Li-ion batteries to meet customer expectations EU.3.4. Smart, green and integrated transport
GV-12-2016 ERA-NET Co-fund on electromobility EU.3.4. Smart, green and integrated transport
GV-13-2017 Production of next generation battery cells in Europe for transport applications EU.3.4. Smart, green and integrated transport
GV-2-2014 Optimised and systematic energy management in electric vehicles EU.3.4. Smart, green and integrated transport
GV-3-2014 Future natural gas powertrains and components for cars and vans EU.3.4. Smart, green and integrated transport
GV-4-2014 Hybrid light and heavy duty vehicles EU.3.4. Smart, green and integrated transport
GV-5-2014 Electric two-wheelers and new ultra-light vehicle concepts EU.3.4. Smart, green and integrated transport
GV-6-2015 Powertrain control for heavy-duty vehicles with optimised emission EU.3.4. Smart, green and integrated transport
GV-7-2014 Future alternative fuel powertrains and components for heavy duty vehicles EU.3.4. Smart, green and integrated transport
GV-8-2015 Electric vehicles’ enhanced performance and integration into the transport system and the grid EU.3.4. Smart, green and integrated transport
H2020-EngineRetrofitPrize-2016 EngineRetrofitPrize-01-2016 EU.3.4. Smart, green and integrated transport
H2020-FutureEnginePrize-2016 FutureEnginePrize-01-2016 EU.3.4. Smart, green and integrated transport
IBA-SC4-OA4-2018 Support to the ITF Decarbonising Transport project EU.3.4. Smart, green and integrated transport
IT-1-2014 Small business innovation research for Transport EU.3.4. Smart, green and integrated transport
IT-1-2014-1 Small business innovation research for Transport EU.3.4. Smart, green and integrated transport
IT-1-2015 Small business innovation research for Transport EU.3.4. Smart, green and integrated transport
IT-1-2015-1 Small business innovation research for Transport EU.3.4. Smart, green and integrated transport
JTI-CS2-2014-CFP01-AIR-01-01 Aerodynamic and acoustic capabilities developments for close coupling, high bypass ratio turbofan Aircraft integration EU.3.4.5.4. ITD Airframe
JTI-CS2-2014-CFP01-AIR-01-02 Advanced predictive models development and simulation capabilities for Engine design space exploration and performance optimization EU.3.4.5.4. ITD Airframe
JTI-CS2-2014-CFP01-AIR-01-03 CROR Engine debris Impact. Shielding design, manufacturing, simulation and Impact test preparation EU.3.4.5.4. ITD Airframe
JTI-CS2-2014-CFP01-AIR-01-04 Aero-acoustic experimental characterization of a CROR (Contra Rotating Open Rotor) engine WT model with core flow in propellers architecture EU.3.4.5.4. ITD Airframe
JTI-CS2-2014-CFP01-AIR-01-05 Blade FEM impact simulations and sample manufacturing for CROR Aircraft EU.3.4.5.4. ITD Airframe
JTI-CS2-2014-CFP01-AIR-01-06 Design and demonstration of a laminar nacelle concept for business jet EU.3.4.5.4. ITD Airframe
JTI-CS2-2014-CFP01-AIR-01-07 Eco Design for Airframe - Re-use of Thermoplastics Composites EU.3.4.5.4. ITD Airframe
JTI-CS2-2014-CFP01-AIR-02-01 Flightworthy Flush & Lightweight doors for unpressurized Fast Rotorcraft EU.3.4.5.4. ITD Airframe
JTI-CS2-2014-CFP01-AIR-02-02 Bird strike - Erosion resistant and fast maintainable windshields EU.3.4.5.4. ITD Airframe
JTI-CS2-2014-CFP01-AIR-02-03 Curved stiffened panels in thermoplastics by preindustrial ISC process EU.3.4.5.4. ITD Airframe
JTI-CS2-2014-CFP01-AIR-02-04 New enhanced acoustic damping composite material EU.3.4.5.4. ITD Airframe
JTI-CS2-2014-CFP01-AIR-02-05 Structural bonded repair of monolithic composite airframe EU.3.4.5.4. ITD Airframe
JTI-CS2-2014-CFP01-AIR-02-06 Simulation tool development for a composite manufacturing process default prediction integrated into a quality control system EU.3.4.5.4. ITD Airframe
JTI-CS2-2014-CFP01-AIR-02-07 Design Against Distortion: Part distortion prediction, design for minimized distortion, metallic aerospace parts EU.3.4.5.4. ITD Airframe
JTI-CS2-2014-CFP01-ENG-01-01 Engine Mounting System (EMS) for Ground Test Demo EU.3.4.5.5. ITD Engines
JTI-CS2-2014-CFP01-ENG-02-01 Development of an all-oxide Ceramic Matrix Composite (CMC) Engine Part EU.3.4.5.5. ITD Engines
JTI-CS2-2014-CFP01-ENG-03-01 Characterisation of Thermo-mechanical Fatigue Behaviour EU.3.4.5.5. ITD Engines
JTI-CS2-2014-CFP01-ENG-03-02 Advanced analytical tool for the understanding and the prediction of core noise for large civil aero engine with low emission core EU.3.4.5.5. ITD Engines
JTI-CS2-2014-CFP01-ENG-03-03 VHBR Engine - Advanced bearing technology EU.3.4.5.5. ITD Engines
JTI-CS2-2014-CFP01-ENG-03-04 Crack growth threshold analysis in TiAl alloys EU.3.4.5.5. ITD Engines
JTI-CS2-2014-CFP01-ENG-04-01 Power Density improvement demonstrated on a certified engine EU.3.4.5.5. ITD Engines
JTI-CS2-2014-CFP01-ENG-04-02 High Performance Turbocharger EU.3.4.5.5. ITD Engines
JTI-CS2-2014-CFP01-ENG-04-03 Alternative Architecture Engine research EU.3.4.5.5. ITD Engines
JTI-CS2-2014-CFP01-ENG-04-04 Engine Installation Optimization EU.3.4.5.5. ITD Engines
JTI-CS2-2014-CFP01-FRC-02-01 Support to the aerodynamic and aeroelastic analysis of a trimmed, complete compound R/C and related issues EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2014-CFP01-FRC-02-02 Aerodynamic and functional design study of a full-fairing semi-watertight concept for an articulated rotor head EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2014-CFP01-FRC-02-03 Support to the aerodynamic analysis and design of propellers of a compound helicopter EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2014-CFP01-FRC-02-04 Tools development for aerodynamic optimization on engine air intake EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2014-CFP01-FRC-02-05 HVDC Starter/Generator EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2014-CFP01-FRC-02-06 High Voltage Network Battery EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2014-CFP01-FRC-02-07 Power Conversion EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2014-CFP01-FRC-02-08 HVDC Network management EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2014-CFP01-LPA-01-01 OPEN ROTOR Engine Mounting System EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2014-CFP01-LPA-01-02 Support to future CROR and UHBR propulsion system maturation EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2014-CFP01-LPA-01-03 Development of advanced laser-beam welding technology for the manufacturing of structures for titanium HLFC structures EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2014-CFP01-LPA-02-01 Cost Reduction On Composite Structure Assembly – Blind fastener inspection technology for quality control EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2014-CFP01-LPA-02-02 Cost Reduction On Composite Structure Assembly - Definition And Development Of An Inspection Tool To Characterize Inner Surface Hole Quality EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2014-CFP01-LPA-02-03 Rapid Assembly Of Bracket For Structure-System Integration EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2014-CFP01-LPA-02-04 Automation in Final Aircraft Assembly Lines and Enabling Technologies EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2014-CFP01-LPA-02-05 Environmental Friendly Fire Suppression EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2014-CFP01-LPA-02-06 Development of Thermoelastic Stress Analysis for the detection of stress hotspots during structural testing EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2014-CFP01-LPA-03-01 Process and Methods for E2E Maintenance Architecture development and demonstrations and solutions for technology integration EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2014-CFP01-LPA-03-02 Aircraft System Prognostic solutions integrated into an airline E2E maintenance operational context EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2014-CFP01-LPA-03-03 Airline Maintenance Operations implementation of an E2E Maintenance Service Architecture and its enablers EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2014-CFP01-REG-02-01 Aerodynamic characterization of control devices for wing loads control and aircraft response characterization of a regional turboprop aircraft EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2014-CFP01-SYS-02-01 Smart Integrated Wing – Life extended hydrostatic & lubricated systems EU.3.4.5.6. ITD Systems
JTI-CS2-2014-CFP01-SYS-02-02 Modular, scalable, multi-function, high power density power controller for electric taxi EU.3.4.5.6. ITD Systems
JTI-CS2-2014-CFP01-SYS-02-03 Robust package for harsh environment and optimization of electrical characteristic of rectifier bridge using high current diode EU.3.4.5.6. ITD Systems
JTI-CS2-2014-CFP01-SYS-02-04 Smart Oil pressure sensors for oil cooled starter/generator EU.3.4.5.6. ITD Systems
JTI-CS2-2014-CFP01-SYS-02-05 Instrumented bearing for oil cooled starter/generator EU.3.4.5.6. ITD Systems
JTI-CS2-2014-CFP01-SYS-02-06 Evaluate mechanical and fatigue capabilities for diode die in harsh environment EU.3.4.5.6. ITD Systems
JTI-CS2-2014-CFP01-SYS-02-07 Development of MODELICA libraries for ECS and thermal management architectures EU.3.4.5.6. ITD Systems
JTI-CS2-2014-CFP01-SYS-02-08 Embedded sensors technology for air quality measurement EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CFP02-AIR-01-08 CROR Engine debris Middle level Impact and mechanical test EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-AIR-01-09 Experimental characterization of turbulent pressure fluctuations on realistic Contra-Rotating Open Rotor (CROR) 2D airfoil in representative high subsonic Mach number. EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-AIR-01-10 Erosion-resistant functional coatings EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-AIR-01-11 High accuracy and low intrusiveness in-flight wing shape and temperature measurements EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-AIR-01-12 Tool-Part-Interaction simulation process linked to laminate quality EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-AIR-01-13 Complex (composite) part Ultrasonic inspection facilitated by man-robot collaboration EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-AIR-01-14 Technology evaluation of immersive technologies for in-flight applications EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-AIR-02-08 Ice protection system based on two-phase heat transport technologies integrated in representative engine intake structure EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-AIR-02-09 HVDC Electrical Power Conversion and Distribution System Development EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-AIR-02-10 Integrated airborne antenna for satellite communications in wing – fuselage airframe fairing EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-AIR-02-11 Ice protection technology based on electromagnetic induction integrated in representative leading edge structure EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-AIR-02-12 System development for optical fiber sensing technology measurements for industrial aeronautical contexts: composite manufacturing plants, structural test platforms and airborne conditions EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-AIR-02-13 Prototype Manufacturing Tooling for Single Parts Manufacturing of the Rotorless tail for LifeRCraft. EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-AIR-02-14 Prototype Tooling for Sub-Assembly, Final Assembly and Transport of the Rotorless tail for the Compound RC. EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-AIR-02-15 Design Against Distortion: Part distortion prediction, design for minimized distortion, carbon-epoxy aerospace parts EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-AIR-02-16 Process development for composite frames manufacturing with high production rate and low cost EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CFP02-ENG-01-02 Conventional and Smart Bearings for Ground Test Demo EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CFP02-ENG-01-03 More electric, advanced hydromechanics propeller control components EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CFP02-ENG-01-04 Engine Mounting System (EMS) for Ground Test Turboprop Engine Demonstrator EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CFP02-ENG-02-02 Integration of Laser Beam Melting Simulation in the tool landscape for process preparation of Additive Manufacturing (AM) for Aero Engine applications EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CFP02-ENG-02-03 Integration of a property simulation tool for integrated virtual design & manufacturing of forged discs/rotors for aero engine applications EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CFP02-ENG-03-01 Industry focused eco-design EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CFP02-ENG-03-02 Jet Noise Reduction Using Predictive Methods EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CFP02-ENG-03-03 Catalytic control of fuel properties for large VHBR engines EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CFP02-ENG-03-04 Development of coupled short intake / low speed fan methods and experimental validation EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CFP02-ENG-04-05 Powerplant Shaft Dynamic and associated damping system EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CFP02-FRC-01-01 Development and demonstration of materials and manufacturing process for ultra high reliability electric Anti-ice/De-ice thermal layers for high strain civil rotor blades and airframe sections of tiltrotor EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CFP02-FRC-01-02 Development and demonstration of materials and manufacturing process for high power density homokinetic drive joints for civil rotor applications EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CFP02-FRC-01-03 Development and validation of an optimised gearbox housing structural design and manufacturing process, based on additive layer manufacturing concept leading to a flight cleared demonstrator. EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CFP02-FRC-01-04 Design, development and flight qualification of a highspeed/high torque novel freewheeling clutch architecture for tiltrotor main drive system EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CFP02-FRC-01-05 Design, development and flight qualification of a novel, integrated high efficiency heat exchanger for tiltrotor transmission oil cooling EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CFP02-FRC-01-06 Design, development, testing and qualification of a high-reliability integrated fuel gauging and distribution system providing active CG management in a civil tiltrotor EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CFP02-FRC-02-09 Light weight, impact resistant, canopy for fast compound rotorcraft EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CFP02-FRC-02-10 Multipurpose test rig for transmission gear boxes EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CFP02-FRC-02-11 Design and realization of equipped engine compartments for a fast compound rotorcraft EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CFP02-FRC-02-12 Fuel bladder tanks for a fast compound rotorcraft EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CFP02-FRC-02-13 HVDC Generator EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CFP02-FRC-02-14 Bird strike- and erosion resistant and fast maintainable windshields EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CFP02-LPA-01-04 Active technologies for acoustic and vibration comfort EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CFP02-LPA-01-05 Validation of aero-vibro-acoustic model on new aerodynamic configurations. EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CFP02-LPA-01-06 Laminar Horizontal Tail Plane full scale ground demonstrator EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CFP02-LPA-01-07 Design, test and manufacturing of robust fluidic actuators EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CFP02-LPA-01-08 Drive and control system for piezoelectric AFC actuators EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CFP02-LPA-01-09 Test aircraft preparation and qualification for Scaled Flight Testing (PREP) EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CFP02-LPA-01-10 Hybrid Propulsion Demonstrator Components – Electric Power Drives EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CFP02-LPA-01-11 Hybrid Propulsion Component Studies – Electrics EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CFP02-LPA-02-07 Landing gear large die-forged fitting with improved mechanical performance EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CFP02-LPA-02-08 High production rate composite Keel Beam feasibility EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CFP02-LPA-02-09 Integrated main landing gear bay EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CFP02-LPA-02-10 Development of pultrusion manufacturing applications EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CFP02-LPA-03-04 Touchscreen control panel for critical system management functions EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CFP02-LPA-03-05 New flight crew oxygen mask concept for prolonged use in civil aircraft EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CFP02-LPA-03-06 Head Up System integration in next generation cockpits EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CFP02-REG-01-01 Smart-grid converter EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2015-CFP02-REG-02-02 Powered WT model design and manufacturing of the FTB2 aircraft configuration for aerodynamic tests in wind tunnel at low and high Reynolds number EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2015-CFP02-SYS-01-01 High brightness microdisplay system for Head Up Displays EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CFP02-SYS-02-09 ALGeSMo (Advanced Landing Gear Sensing & Monitoring ) EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CFP02-SYS-02-10 Analysis of centrifugal compressor instabilities occurring with vaneless diffusor, at low mass flow momentum EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CFP02-SYS-02-11 Innovative design of acoustic treatment for air conditioning system EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CFP02-SYS-02-12 Eco Design : Optimization of SAA chromium free sealing process EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CFP02-SYS-02-13 Analysis, validation and data collection of design and operating parameters for advanced cabin ventilation concepts related to future aircraft energy management systems EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CFP02-SYS-03-01 Electromechanical actuator for primary moveable surfaces of small aircraft with health monitoring EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CFP02-SYS-03-02 Passive thermo-acoustic insulation for small aircraft. EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CFP02-SYS-03-03 Database of dynamic material properties for selected materials commonly used in aircraft industry. EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CPW02-AIR-01-03 Development of airframe technologies aiming at improving aircraft life cycle environmental footprint EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CPW02-AIR-02-05 Optimized Composite Structures for Small Aircraft EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CPW02-AIR-02-06 Airframe on-ground structural and functional tests of advanced structures EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CPW02-AIR-02-07 More affordable small aircraft manufacturing EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CPW02-AIR-02-08 Cabin systems and Ergonomics, comfort & human perception improvements EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CPW02-ENG-01-04 Intermediate Compressor Frame for Ultra High Propulsive Efficiency (UHPE) Demonstrator for Short / Medium Range aircraft EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CPW02-ENG-01-05 Turbine Vane Frame for Ultra High Propulsive Efficiency (UHPE) Demonstrator for Short / Medium Range aircraft EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CPW02-ENG-01-06 Business Aviation / Short Regional TP demonstrator - Advanced Power & Accessory Gear Box EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CPW02-ENG-01-07 Business Aviation / Short Regional TP demonstrator - Advanced propeller & controls design & manufacturing and IPPS aero-acoustic performance assessment EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CPW02-LPA-01-07 Power Gear Box (PGB) of the flight demonstrator Contra Rotative Open Rotor (CROR) engine EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CPW02-LPA-03-01 Maturation, validation and integration with the airframers of cockpit functions and avionics technologies EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CPW02-LPA-03-02 Reduced cockpit workload EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CPW02-LPA-03-03 Cockpit utility management system Integrated cabinet for business jet and large passenger aircraft cockpits EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CPW02-REG-01-03 Green and cost efficient Conceptual Aircraft Design including Innovative Turbo-Propeller Power-plant EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2015-CPW02-REG-02-02 Wing Integration Regional Demonstrator FTB#2 EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2015-CPW02-SYS-02-02 Adaptive Environmental Control System EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CPW02-SYS-03-02 Affordable future avionic solution for small aircraft, enablers for single pilot operation EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CPW03-AIR-01-04 Next generation movables for high speed aircraft. EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CPW03-AIR-02-09 Design, manufacture and deliver Technology Demonstrator of high visibility, crashworthy, low-drag integrated cockpit section for next generation civil tiltrotor (NGCTR) EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CPW03-AIR-02-10 Design, manufacture and deliver Technology Demonstrator of high visibility, crashworthy, low-drag integrated cabin section for next generation civil tiltrotor (NGCTR) EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CPW03-AIR-02-11 Design, manufacture and deliver Technology Demonstrator of high visibility, crashworthy, low-drag integrated Rear Fuselage and Tail sections for next generation civil tiltrotor (NGCTR) EU.3.4.5.4. ITD Airframe
JTI-CS2-2015-CPW03-ENG-01-08 HP Core module and its associated control laws and equipment for the UHPE demonstrator EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CPW03-ENG-03-03 VHBR Engine - HP Turbine Technology EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CPW03-ENG-03-04 Demonstration of CFD capability in the simulation of air-oil flow in complex aero-engine bearing chambers - a systematic approach EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CPW03-ENG-03-05 Development of large volume, mass optimised, integrated oil storage systems for large VHBR engines EU.3.4.5.5. ITD Engines
JTI-CS2-2015-CPW03-FRC-01-01 Design, development, testing and flight qualification of smart fly-by-wire actuators for primary flight control of a civil tiltrotor EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CPW03-FRC-02-03 New generation landing gear for a compound fast rotorcraft EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CPW03-FRC-02-04 LifeRCraft Main Gear Box EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CPW03-FRC-02-05 Electrical Wiring Interconnection System for a compound fast rotorcraft EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CPW03-FRC-02-06 Innovative actuators for compound rotorcraft flight control EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2015-CPW03-LPA-01-08 Engine Mounting System for the CROR Flight Test Demo EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CPW03-LPA-01-09 Aircraft Configuration Studies and Demonstration (Scaled Flight testing, Instrumentation) EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CPW03-LPA-01-10 Aircraft and Hybrid Propulsion System Architecture, Integration and Verification EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2015-CPW03-SYS-02-03 Short TAT braking system - Optimized tyre design for improved brake cooling EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CPW03-SYS-02-04 High efficient compact electro-mechanical brake for small aircraft and helicopters with advanced brake disc material EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CPW03-SYS-02-05 High efficient structural landing gear parts based on advanced carbon fiber material systems and highly automated production technologies for helicopter and aircraft EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CPW03-SYS-02-06 HVDC Power Center and Functions EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CPW03-SYS-02-07 Detection and Characterization of Icing Conditions Contributing to Ice Protection Optimization EU.3.4.5.6. ITD Systems
JTI-CS2-2015-CPW03-SYS-02-08 Electro-Thermal Wing Ice Protection System For Large Aircraft EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP03-AIR-01-15 Functional top coat for natural laminar flow EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-AIR-01-16 Design Guide Lines and Simulation Methods for Additive Manufactured Titanium Components EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-AIR-01-17 Orbital Drilling of small (<10mm diameter) holes, standardly spaced with aluminium material in the stack EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-AIR-01-18 Research and development of a compact drilling and fastening unit suitable for a range of standard 2 piece fasteners EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-AIR-01-19 Hybrid Aircraft Seating Requirement Specification and Design - HAIRD EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-AIR-02-17 Flexible Test Rig of Aircraft Control Surfaces powered by EMAs EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-AIR-02-18 Prototype Tooling for subcomponents manufacturing for wing winglet EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-AIR-02-19 Prototype Tooling for Sub-Assembly, Final Assembly and Transport of the Morphing Winglet and Multifunctional Outer Flaps of the next generation optimized wing box. EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-AIR-02-20 Low cost Fused Filament Fabrication of high performance thermoplastics for structural applications EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-AIR-02-21 Innovative Tooling Design and Manufacturing for Thermoplastic Stringers and High Integration EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-AIR-02-22 Adaptive multifunctional innovative Test Rigs for both structural test of multidimensional and multishape panels and structural tests on Tail unit EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-AIR-02-23 Automation of hand lay-up manufacturing process for composite stiffeners EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-AIR-02-24 Tests for leakage identification on Aircraft fluid mechanical installations EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-AIR-02-25 Development and demonstration of materials and manufacturing process for high structural damping composite beams for civil rotor and airframe applications EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-AIR-02-26 Development of innovative automated fiber placement machine for composite fuselage manufacturing with high performance hybrid materials. EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-AIR-02-27 Development, fabrication, verification and delivery of innovative and flexible system for automated drilling and fastener insertion on fuselage barrel. EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP03-ENG-01-05 Optimisation of sensor and associated data acquisition system for blade behaviour EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP03-ENG-01-06 Very high loaded planet bearings enabling technologies EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP03-ENG-01-07 Advanced mechatronics devices for electrical management system of Turboprop EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP03-ENG-01-08 Advanced Bearings for Turboprop engine EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP03-ENG-01-09 Integrated air-oil cooling system EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP03-ENG-02-04 Automated full faced measurement of complex geometries EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP03-ENG-03-09 Orbiting Journal Bearing Rig EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP03-ENG-03-10 Innovations in Titanium investment casting of lightweight structural components for aero engines EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP03-ENG-03-11 Aerodynamic rigs for VHBR IP Turbine EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP03-ENG-03-12 Development of intelligent oil system enablers for large VHBR engine oil lubrication and heat management systems EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP03-FRC-01-02 Development and demonstration of materials and manufacturing process for high power density homokinetic drive joints for civil rotor applications EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2016-CFP03-FRC-01-07 Next generation smart active inceptors for a civil tiltrotor EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2016-CFP03-FRC-01-08 High Speed HVDC Generator/Motor EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2016-CFP03-FRC-01-09 Power Distribution EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2016-CFP03-FRC-01-10 Next Generation Fuel Storage System EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2016-CFP03-FRC-02-09 Light weight, impact resistant, canopy for fast compound rotorcraft EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2016-CFP03-FRC-02-11 Design and realization of equipped engine compartments for a fast compound rotorcraft EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2016-CFP03-FRC-02-15 Advanced Health Monitoring System for next generation materials EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2016-CFP03-LPA-01-12 High cycle fatigue prediction methodology for fiber reinforced laminates for aircraft structures in CROR environment – development and validation EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP03-LPA-01-13 Manufacturing of prototype elements for hybridation of titanium and epoxy resin - Characterisation of the Titanium TiCP40 - CFRP adhesive joint EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP03-LPA-01-14 Automated injection RTM system process based in innovative sensor technologies in a low cost smart manufacturing tooling prototype and any tooling involved in the manufacture or the validation of the structure EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP03-LPA-01-15 High Fidelity time-accurate CFD Simulations EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP03-LPA-01-16 Aerodynamic Isolated and Installed Methods for UHBR Adaptable Area Nozzles EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP03-LPA-01-17 Windtunnel test for flow control at the engine/pylon with a representative aircraft configuration under fully realistic flow conditions EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP03-LPA-02-11 Structural energy storage and power generation functionalities in multifunctional composite structures EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP03-LPA-02-12 Development of System Components for automated Cabin and Cargo Installation EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP03-LPA-02-13 Design for Automated Installation of Linings and Hatracks in Cabin and Cargo EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP03-LPA-02-14 Assembly Planning and Simulation of an Aircraft Final Assembly Line (FAL) EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP03-LPA-03-07 Secured and performant wireless connection based on light (LiFi) for EFB, headset and other pilot connected devices EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP03-REG-01-02 Green Turboprop configuration - Natural Laminar Flow adaptive wing concept aerodynamic experimental validation (WTT2) EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2016-CFP03-REG-01-03 Aileron Actuation Subsystem using EMAs EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2016-CFP03-REG-01-04 Development and delivery of a flexible assembly system based on reverse engineering, tolerance analysis and Determinant Assembly Approach of wing box EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2016-CFP03-SYS-01-02 Mems Accelerometer– Maturity Assessment And Improvement EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP03-SYS-02-14 Development of electromechanical actuators and electronic control units for flight control systems EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP03-SYS-02-15 Smart oil pressure sensors for all oil cooled starter/generator EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP03-SYS-02-16 Optimization two phases cooling solution using micro pump brick EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP03-SYS-02-17 innovative pump architecture for cooling electrical machine EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP03-SYS-02-18 Eco Design: Injection of thermoplastic reinforced with long fibers (carbon, glass, Kevlar…) for scroll reinforcement EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP03-SYS-02-19 Eco Design: Composite functionalization: thermal and electrical conductivity EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP03-SYS-02-20 Eco Design: Screening and development of optimized materials (wires, resins and varnishes) for high temperature coils EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP03-SYS-02-21 Model-Based identification and assessment of aircraft electrical and thermal loads architecture management functions EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP03-SYS-03-04 Low Power De-Icing System suitable for Small Aircrafts EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP03-SYS-03-05 Eco Design: High efficient non-structural landing gear parts based on advanced carbon fiber material systems and highly automated production technologies for helicopter and aircrafts. EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP03-SYS-03-06 Eco Design : Electrocoating process for Cr6-free surface treatment of aluminium parts EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP04-AIR-01-20 Development of a highly instrumented, modular fan module for aerodynamic and acoustic wind tunnel testing EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP04-AIR-01-21 Integrated Automated Test Bench Control System with Certifiable Test Documentation Functionality EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP04-AIR-01-22 Laminated and panoramic Cabin Windows for Business Jet applications EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP04-AIR-01-23 Novel manufacture of low weight skin without chemical milling EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP04-AIR-01-24 Multi-functional cabin rest area EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP04-AIR-02-28 Development of methods for deriving optimized shapes of morphing structures considering both aerodynamic performances and specific mechanical morphing boundary conditions EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP04-AIR-02-29 Development and Manufacturing of Prototype metallic parts. EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP04-AIR-02-30 Development and manufacturing of innovative stamping dies for aluminium ribs Hot Stamping EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP04-AIR-02-31 Numerical methodologies and related tools for effect of defect prediction in manufacturing EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP04-AIR-02-32 Testing matrix optimization by interaction between numerical modelling and innovative non-contact measurement technology EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP04-AIR-02-33 Developing innovative joining concepts and their manufacturing methodologies EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP04-AIR-02-34 Hardware demonstrator development and deployment on Future Industrial Human Machine Interface (HMI) and Connected factory technologies EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP04-AIR-02-35 Development and deployment of new procedures and PLM Tools for A/C Ground Functional testing with Eco-design criteria EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP04-AIR-02-36 Development of prototype system based on Laser UT technology for high speed contactless no-couplant inspection of hybrid and thick composite structures EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP04-AIR-02-37 Quilted Stratum Processes (QSP) for low cost and eco thermoplastic manufacturing of complex composite parts EU.3.4.5.4. ITD Airframe
JTI-CS2-2016-CFP04-ENG-01-10 High speed turbine performance improvement through cascade tests EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP04-ENG-01-11 2 VBV actuators (LHS & RHS) for Ground Test Demo 2 VSV booster actuators (LHS & RHS) for Ground Test Demo EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP04-ENG-01-12 Development of the investment casting process and weldability for high temperature capable superalloys EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP04-ENG-01-13 High load gear and bearings materials EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP04-ENG-01-14 Experimental & Numerical analysis dedicated to FOD Management for Turboprop Air intake EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP04-ENG-02-05 Substitution of Chromium(VI)-based substances for corrosion protection of Aluminum- and Magnesium alloys EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP04-ENG-03-13 Small-Scale Spin Test for Hoop-Burst Overspeed Assessment EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP04-ENG-03-14 Fuel injector coking EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP04-ENG-04-06 Engine Control System EU.3.4.5.5. ITD Engines
JTI-CS2-2016-CFP04-FRC-01-11 Hydrophobic Windscreen Protection for Next Generation Civil Tilt Rotor EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2016-CFP04-FRC-01-12 Flight critical wireless slip ring for a civil tiltrotor EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2016-CFP04-FRC-02-16 Bird strike - Erosion resistant and fast maintainable windshields EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2016-CFP04-FRC-02-17 Flight management system providing noise abatement flight procedures for compound rotorcraft EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2016-CFP04-FRC-02-18 Full Fairing for Main Rotor Head or the LifeRCraft demonstrator EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2016-CFP04-LPA-01-18 New Acoustic Signal Processing Methods EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP04-LPA-01-19 High fidelity Large Eddy Simulation using reduced model for engine broadband noise prediction EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP04-LPA-01-20 Hybrid machining for high removal rates and surface integrity applicable for safety critical super alloy parts EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP04-LPA-01-21 Design for High AN² (Disk and Blade attached) EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP04-LPA-01-22 RIGHT (Rig instrumentation, test support & data analysis of High Speed Power Turbine) EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP04-LPA-01-23 Low Cost, Smart Tooling for Composites EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP04-LPA-01-24 High throughput micro drilling (HTMD) system EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP04-LPA-01-25 Smart amplifier and a control box for fluidic actuators EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP04-LPA-01-26 Design, Build and Test Innovative Actuation Concepts for Separation Flow Control EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP04-LPA-01-27 Development of scaled models for Synthetic Jet Actuators based on Aerodynamic Characterization in CFD, Ground and Wind Tunnel Testing EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP04-LPA-01-28 Divergent Aircraft Configurations EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP04-LPA-02-15 Development of a Multi-scale method to predict large aircraft component failure taking into consideration Manufacturing Uncertainties for Predictive Virtual Simulations EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP04-LPA-03-08 Active Cockpit Simulator/Ground Station Facility and Test Environment enhancement EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CFP04-REG-01-05 Green Turboprop - High lift configuration integrating adaptive wing concept - Low Speed experimental validation EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2016-CFP04-REG-01-06 High Fidelity Integrated Non-Linear MBS Modelling of Morphing Wing EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2016-CFP04-REG-01-07 Innovative alloy development for structural part fabrication with Additive Manufacturing Technology EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2016-CFP04-REG-01-08 Advanced Energy Storage and Regeneration System for Enhanced Electrical Energy Management EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2016-CFP04-REG-02-03 Electrohydraulic integration of an hybrid surface actuation systems EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2016-CFP04-SYS-01-03 Very high brightness & compact full color display for next generation eyes-out cockpit products EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP04-SYS-02-22 Validation tests of electromechanical actuators and its dedicated control units at TRL 6 level EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP04-SYS-02-23 ECO-design based techniques and machinary for improved racking and distribution boxes manufacturing EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP04-SYS-02-24 Electrical simulation model identification method and tool EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP04-SYS-02-25 Innovative cooling system for embedded power electronics EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP04-SYS-02-26 Multivariable control approach for electrical air conditioning pack EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP04-SYS-02-27 Alternative recirculation filter for better cabin air quality EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP04-SYS-02-28 Analysis, validation and parametric studies of design and operating parameters for modern cabin ventilation concepts related to future aircraft energy management systems EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP04-SYS-03-07 An innovative Electrical Power Distribution System (EPDS) for Small Aircraft EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP04-SYS-03-08 Electromechanical actuation for landing gear EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CFP05-TE2-01-01 Airport Level Assessment (Fixed-wing) EU.3.4.5.9. Technology Evaluator
JTI-CS2-2016-CFP05-TE2-01-02 Airport and ATS Level Assessment (Rotorcraft) EU.3.4.5.9. Technology Evaluator
JTI-CS2-2016-CFP05-TE2-01-03 ATS Level business jet 2035 forecast EU.3.4.5.9. Technology Evaluator
JTI-CS2-2016-CFP05-TE2-01-04 ATS Level Rotorcraft 2035 forecast EU.3.4.5.9. Technology Evaluator
JTI-CS2-2016-CFP05-TE2-01-05 ATS Level SAT 2035 forecast EU.3.4.5.9. Technology Evaluator
JTI-CS2-2016-CPW04-FRC-01-02 Design, manufacture and deliver a high performance, low cost, low weight wing for Next Generation TiltRotor (NGCTR) EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2016-CPW04-LPA-01-11 Design of a wing with HLFC (Hybrid Laminar Flow Control) technology EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CPW04-LPA-01-12 High Density Energy Conversion System for an APU EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CPW04-LPA-02-03 Development and manufacturing of multifunctional and integrated thermoplastic fuselage shell, passenger floor and cargo floor including the main system, cabin and cargo elements EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2016-CPW04-SYS-01-01 Networking solutions for future cockpit communications EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CPW04-SYS-01-02 System solutions for Cabin & Cargo operations, communication and power management EU.3.4.5.6. ITD Systems
JTI-CS2-2016-CPW04-SYS-02-09 Energy storage EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CFP06-AIR-01-25 Prediction of aerodynamic loads at high Reynolds Number EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-01-26 Development of innovative and optimized stiffeners run-out for overall panel weight saving of composite wing EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-01-27 Innovative solutions for metallic ribs or fittings introduced in a composite box to optimally deal with thermo-mechanical effects EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-01-28 Optimized cockpit windshields for large diameter business aircrafts EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-01-29 Optimisation of Friction Stir Welding (FSW) and Laser Beam Welding (LBW) for assembly of structural aircraft parts EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-02-39 Integration of innovative ice protection systems into structure and their validation EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-02-40 Enhanced Low Cost Complex Composite Structures. EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-02-41 Integrated electronics for actuator data and power management for Morphing Leading Edge activities EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-02-42 Lay-up tools for net-shape AFP-manufacturing of geometrically complex helicopter sideshell sandwich-panels EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-02-43 Low cost optical wave guides for damage detection including analysis and aircraft data transfer related to aircraft functional needs with self-testing connection EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-02-44 Adjustable high loaded rod EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-02-45 Development and deployment of PLM Tools for A/C Ground Functional testing with Eco-design criteria. EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-02-46 Auto testing technologies and more automated factories for Aircraft validation test process EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-02-47 Part specific process optimization in SLM EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-02-48 Development and validation of a portable, automated and jigless system for drilling and assembly of fuselage joints EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-02-49 Development and validation of a self-adaptive system for automated assembly of major composite aerostructures EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-AIR-02-50 Prototype Tooling for subcomponents manufacturing for fuselage. EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CFP06-ENG-01-15 Bearing chamber in hot environment EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CFP06-ENG-01-16 Torque measurement in turbofan EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CFP06-ENG-01-17 Advanced turbine system performance improvement through dual-spool rig tests EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CFP06-ENG-01-18 Development of innovative methods and tooling for machining of slender shafts EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CFP06-ENG-01-19 Thermoplastic Thrust reverser cascade EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CFP06-ENG-01-20 Long Fiber Thrust reverser cascade EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CFP06-ENG-01-21 Aerothermal characterization in the engine compartment EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CFP06-ENG-01-22 Advanced Instrumented Engine cradle of the Turboprop demonstrator EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CFP06-ENG-03-15 IP Turbine Rear Stages Aero/Noise Rigs EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CFP06-ENG-03-16 Development of non-intrusive engine emissions instrumentation capability EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CFP06-ENG-03-17 VHBR Engine – Journal Bearing Technology EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CFP06-ENG-03-18 Development of capability to understand & predict sub-idle & idle behaviour of geared VHBR engines EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CFP06-ENG-03-19 Intermediate Compressor Case Duct Aerodynamics EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CFP06-ENG-04-07 Advanced investigation of ultra compact RQL reverse flow combustor EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CFP06-FRC-01-13 Low-speed Air Data Sensor for Tilt-rotor Control EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2017-CFP06-FRC-01-14 Contactless measurement system for real time monitoring of proprotor flapping angle EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2017-CFP06-FRC-01-15 Interactional aerodynamic assessment of advanced Tilt Rotor configuration EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2017-CFP06-FRC-02-20 Lateral rotor noise prediction dedicated to low noise footprint optimisation of a compound helicopter EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2017-CFP06-FRC-02-21 Emergency Exits and Cabin Footstep for the Fast Rotorcraft EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2017-CFP06-FRC-02-22 Lateral rotor declutching mechanism for a fast compound rotorcraft EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2017-CFP06-FRC-02-23 Enhanced gear strength through cavitation peening technologies EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2017-CFP06-FRC-02-24 Hybrid bearings technologies EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2017-CFP06-FRC-02-25 Fuel System Detail Development, Testing and Manufacturing EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2017-CFP06-FRC-02-26 Compound Rotorcraft Assembly Tooling EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2017-CFP06-FRC-02-27 Rotor’s Flight Test Instrumentation on demonstrator Fast Rotorcraft Project EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2017-CFP06-LPA-01-29 Modelling of installed jet noise for UHBR engine integration with forward flight effects EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-01-30 Test Cell Control System for NPE Demonstrator EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-01-31 Representative HLFC Leading Edge structure – Torsion and Bending Stiffness Test EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-01-32 Insect contamination investigations and mitigation EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-01-33 Multi-physics modelling of elementary physical phenomena applied to an innovative high temperature engine valve EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-01-34 3D printing and harsh environment testing of flow control actuators at aircraft scale EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-01-35 Innovative compact heat exchangers modelisation & characterisation EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-02-16 SmartContainer EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-02-17 Glass fiber based temperature/air humidity and Agent detection sensors & measurement systems EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-02-18 Multi-Physics methodology for phase change due to rapidly depressurised two-phase flows EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-02-19 High performance Body Landing Gear fittings EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-02-20 Manufacturing oriented solution keel beam EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-02-21 Development of systems for automated testing in the aircraft interior EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-03-09 Image based landing solutions for Disruptive Cockpit concept EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-03-10 Avionics Technologies Management solution for Pilot Workload Reduction EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-03-11 Multimodal HMI development tools EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-LPA-03-12 High density Electrical connectors EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CFP06-REG-01-09 Innovative Low Power De-Icing System EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2017-CFP06-REG-01-10 E2-EM Supervisor and Control Algorithms EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2017-CFP06-SYS-01-04 Manufacturing process for ultimate performance inertial MEMS Accelerometer EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CFP06-SYS-01-05 Solutions for voice interaction towards natural crew assistant EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CFP06-SYS-01-06 Affordable Electro-Optical Sensor Cluster/Assembly Unit(LRU) for Vision & Awareness enabling Enhanced Vision, Sense & Avoid, and Obstacle Detection Systems for Aeroplane and Helicopter All-weather Operations and enhanced safety EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CFP06-SYS-02-29 High density energy storage module for an electric taxi EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CFP06-SYS-02-30 Innovative pump architecture for cooling electrical machine EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CFP06-SYS-02-31 Power module EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CFP06-SYS-02-32 Development of functionalizable materials EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CFP06-SYS-02-33 Development of autonomous, wireless, smart and low cost current sensor for monitoring of electrical lines EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CFP06-SYS-02-34 Optical hot air leak detection system proof-of-concept development EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CFP06-SYS-03-09 Computing Node for Safety Critical Applications EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CFP06-SYS-03-10 Electrocoating process for Cr6-free surface treatment of aluminium parts EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CFP06-SYS-03-11 Screening and development of optimized materials (wires, potting resins and impregnating varnishes) for high temperature coils EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CFP06-SYS-03-12 Assessment of Partial Discharge and breakdown behaviour of electric insulation materials for very high voltage gradients EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-AIR-01-30 Finalize and improve the manufacturing of the model of a laminar wing configuration bizjet (LSBJ) EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-AIR-01-31 Evaluation of the benefits of a laminar nacelle and a laminar HTTP installed on a bizjet configuration EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-AIR-01-32 Prototype Tooling for manufacturing composite stiffened panel for a business jet lower wing EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-AIR-01-33 Flexible RTM tool concept for composites with spring back adjustments capabilities EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-AIR-01-34 Development of innovative aluminium filler wire based manufacturing of aeronautic components and structures EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-AIR-01-35 Development of an eco-friendly selective stripping for exterior surfaces of airframe structures EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-AIR-01-36 Hybrid Aircraft Seating Manufacturing & Testing EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-AIR-02-51 Light weight, certifiable airframe structures through combination with high performance materials EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-AIR-02-52 Helicopter carbon composite engine deck EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-AIR-02-53 Innovative & Flexible pilot plant Means for highly integrated AFP infusion wing box aiming at flying demonstrator manufacturing EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-AIR-02-54 Seals for FTB#2 Wing with Additive Manufacturing Technologies EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-AIR-02-55 Thermal conductive coating providing self-limitation of heating power at a selected temperature level EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-AIR-02-56 Advanced Integrated Testing Methods development EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-AIR-02-57 Tests and Modelling for reliability characterization and robustness of optoelectronic transceivers for optical SHM systems EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-AIR-02-58 Optimization of hybrid joining (Refill Friction Stir Spot Welding + adhesive bond) for increasing mechanical properties and corrosion protection of the joints [SAT] EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-AIR-02-59 Breakthrough design concept solutions and technologies for Regional Aircraft Cabin Interiors innovative configuration EU.3.4.5.4. ITD Airframe
JTI-CS2-2017-CfP07-ENG-01-23 Improvement of high speed low pressure turbine performance through reduction of secondary effects EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CfP07-ENG-01-24 Crowned spline surface treatment and modelling EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CfP07-ENG-01-25 Gearbox bearing design & testing EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CfP07-ENG-01-26 Innovative acoustic fan frame liners technologies for UHBR EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CfP07-ENG-01-27 Composite process modelling and net-shape, complex geometry RTM tool design EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CfP07-ENG-01-28 Innovative HPC Flow Treatment Technologies: Design & Experimental Validation Using Advanced Measurement Techniques EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CfP07-ENG-01-29 Characterization of the resistance of TiAl turbine blades to impact EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CfP07-ENG-01-30 Numerical and experimental study of high speed radial flow compressors EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CfP07-ENG-01-31 Unsteady pressure sensor for high pressure and hot environment EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CfP07-ENG-02-06 Experimental investigation of aerodynamic and heat transfer properties for a next generation turbine frame and nozzle EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CfP07-ENG-02-07 Aircraft design and noise assessment for a regional application EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CfP07-ENG-02-08 Optimization of TiAl CALPHAD databases of respective material systems EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CfP07-ENG-03-20 Emissions prediction for very large bypass ratio turbofans EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CfP07-ENG-03-21 Novel Bearings EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CfP07-ENG-03-22 Development and validation of a Powder HIP route for the manufacture of the UltraFan® Demonstrator IP Turbine casing from high temperature material allowing product enhancements at significantly lower costs and environmental footprint EU.3.4.5.5. ITD Engines
JTI-CS2-2017-CfP07-FRC-01-16 Full scale High speed aerodynamics characteristics of the Civil Tilt Rotor EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2017-CfP07-FRC-01-17 Innovative flotation methodologies (system) for tilt rotor EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2017-CfP07-LPA-01-36 Innovative design for reliable and low weight power gearbox planet bearings EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CfP07-LPA-01-37 Next Generation Low Pressure Turbine airfoils by ALM EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CfP07-LPA-01-38 Advance Nacelle Aerodynamic Optimisation EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CfP07-LPA-01-39 Skin Friction measurements on a real aircraft and Fiber-optics based pressure measurements for aircraft applications EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CfP07-LPA-01-40 Novel mechanical drive disconnect for embedded Permanent Magnet machines EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CfP07-LPA-01-41 Advanced manufacturing for MW range power dense electrical machines for aerospace applications EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CfP07-LPA-01-42 Development of power electronic technologies for >1kV aerospace applications EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CfP07-LPA-01-43 Pulsating Heat Pipe (PHP) modelisation & characterisation EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CfP07-LPA-01-44 Quick Disconnect System EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CfP07-LPA-01-45 High Performance Generation Channel Integration EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CfP07-LPA-01-46 Intelligent Power Module EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CfP07-LPA-02-22 Development of a full size automated plant system for fuselage longitudinal and circumferential joints EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CfP07-LPA-03-13 Design and development of smart sensors for detection of human cognitive states implementable in cockpit environment EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CfP07-LPA-03-14 Innovative validation methods and tools for FMS EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2017-CfP07-REG-01-11 Full scale innovative composite frames and shear ties for Regional Aircraft Fuselage barrel on-ground demonstrators. EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2017-CfP07-REG-01-12 Full scale innovative composite doors, surrounds and sub-structure for Regional Aircraft Fuselage barrel on-ground demonstrators EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2017-CfP07-REG-01-13 Full scale Innovative composite windows frames for Regional Aircraft Fuselage barrel on-ground demonstrators EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2017-CfP07-REG-01-14 Full scale innovative composite pax and cargo floor grids for Regional Aircraft Fuselage barrel on-ground demonstrators EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2017-CfP07-REG-01-15 Innovative Primary and Secondary Electrical Distribution Network for Regional A/C EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2017-CfP07-REG-02-04 Technological readiness at the operational level for additive manufacturing in primary structure and large size components EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2017-CfP07-SYS-01-07 Development of a system for pilot eye gaze and gesture tracking in the cockpit environment EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-01-08 Application of machine learning techniques to enableenhance aircraft performances database and facilitate mission optimization objectives EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-01-09 Obstruction detection Sensor for Modular surveillance active Trajectory check improvement EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-01-10 Development of 94 GHz (W-band) Radar Components EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-02-36 Advanced Load Sensing technology for aerospace applications EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-02-37 Development of a new backup electronics unit for Smart Inceptor EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-02-38 Ergonomic impact and new functions induced by Active Inceptor integration in cockpits EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-02-39 Development of a High Voltage Lithium Battery EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-02-40 Development of low insertion/extraction force electrical connecting device EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-02-41 Development of methodology and tools based on advanced statistics applied to Electro Magnetic Compatibility analysis of cable harnesses in aeronautics EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-02-42 Development of low rating and high power HVDC optimized fuses EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-02-43 Design and Development of a high temperature HVDC busbar EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-02-44 Cabin air quality and passenger comfort EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-02-45 Development of a Foreign Object Debris (FOD) protection device applied to an electrical ECS fresh air inlet. EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-03-13 Electro-Mechanical Brake actuation for Small Aircraft [SAT] EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-03-14 Development of Digital Integrated Multifunction Probe for Air Data Sensing [SAT] EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-03-15 Super hydrophobic and erosion resistant coating for turbine scroll and downstream pipe EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-SYS-03-16 Aircraft mission modelling: ground and flight operations EU.3.4.5.6. ITD Systems
JTI-CS2-2017-CfP07-TE2-01-06 TE Technology diffusion model EU.3.4.5.9. Technology Evaluator
JTI-CS2-2018-CfP08-AIR-01-37 Composite mould tool based on 3D printing EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-AIR-01-38 Innovative test rig for the investigation of gust loads in transonic flow conditions EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-AIR-01-39 In-Seat Ventilation & Supply for Personalized Comfort Control on Board an Aircraft EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-AIR-02-60 Full Scale Innovative Integrated Tooling for Composite Material Wing Box [SAT] EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-AIR-02-61 Development and Optimization of Bonding Assembly Technology for a Composite Material Wingbox EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-AIR-02-62 Virtual-Hybrid-Real On Ground demonstration for HVDC & EMA Integration EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-AIR-02-63 Enhanced Low Cost Complex Composite Structures EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-AIR-02-64 Cold Spray of metallic coatings on polymer and composite materials [SAT] EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-AIR-02-65 Design of special welding head for FSW process with automatic adjustable pin and welding force control system [SAT] EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-AIR-02-66 Evaluation and modelling of comfort driving parameters in a Cabin Demonstrator EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-AIR-02-67 Model based development of an innovative ECS air distribution system for ground testing with a Cabin Demonstrator EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-AIR-03-01 Bio contamination survey EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-AIR-03-02 Non destructive testing (NDT) of bonded assemblies EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-AIR-03-03 Sizing for recycled carbon fibres to optimise adhesion in organic/inorganic composite materials EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-AIR-03-04 Development of an anaerobic digester prototype for aircraft use EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-AIR-03-05 Development and evaluation of a manufacturing process for a lightweight aircraft wheel made of CFRP EU.3.4.5.4. ITD Airframe
JTI-CS2-2018-CfP08-ENG-01-32 Optimized UHPE flow path cooling design and testing using advanced manufacturing techniques EU.3.4.5.5. ITD Engines
JTI-CS2-2018-CfP08-ENG-01-33 Prediction of High Frequency Vibrations in Aircraft Engines EU.3.4.5.5. ITD Engines
JTI-CS2-2018-CfP08-ENG-01-34 Airflow characterization through rotating labyrinth seal EU.3.4.5.5. ITD Engines
JTI-CS2-2018-CfP08-ENG-01-35 Oil flow 4 channels regulation valves EU.3.4.5.5. ITD Engines
JTI-CS2-2018-CfP08-ENG-01-36 Optimizing impingement cooling EU.3.4.5.5. ITD Engines
JTI-CS2-2018-CfP08-ENG-01-37 Aerodynamic upgrade of Surface Air Cooled Oil Cooler (SACOC) EU.3.4.5.5. ITD Engines
JTI-CS2-2018-CfP08-ENG-01-38 Low NOx / Low soot injection system design for spinning combustion technology EU.3.4.5.5. ITD Engines
JTI-CS2-2018-CfP08-ENG-02-09 Development and verification of microstructure, residual stress and deformation simulation capability for additive free-form deposition using multiple superalloys EU.3.4.5.5. ITD Engines
JTI-CS2-2018-CfP08-ENG-03-23 Probabilistic simulation of defect probability in LWD – Wire fusion processes EU.3.4.5.5. ITD Engines
JTI-CS2-2018-CfP08-ENG-03-24 VHCF material model for case hardened gear steels for application in an epicyclic power gearbox EU.3.4.5.5. ITD Engines
JTI-CS2-2018-CfP08-ENG-03-25 Development of design methodologies for thermal management and scavenge / sealing interactions in future ventless UltraFan bearing chambers EU.3.4.5.5. ITD Engines
JTI-CS2-2018-CfP08-FRC-01-18 Adoption of a “Digital Transformation” approach to improve NGCTR design and simulation EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2018-CfP08-FRC-01-19 Certification by Simulation for Rotorcraft Flight Aspects (CSRFA) EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2018-CfP08-FRC-01-20 Design, development and flight qualification of a supercritical composite shaft drive line for tiltrotor main drive system EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2018-CfP08-FRC-01-21 Development of integrated engine air intake and protection systems for Tilt Rotor EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2018-CfP08-FRC-01-22 Engine exhaust wake flow regulator for Tilt Rotor EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2018-CfP08-FRC-01-23 Experimental characterization and optimization of the RH and LH Engine intakes configuration of the next generation Tilt Rotor EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2018-CfP08-FRC-01-24 High efficiency full electrical low pressure Compartment Pressure Control System for tilt-rotor applications EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-2018-CfP08-LPA-01-47 High Performance Electrical Components for Bleed Control EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-LPA-01-48 Advanced Pitch Control Mechanism TRL4 Demonstration EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-LPA-01-49 Oil Transfer Bearing for Advanced Pitch Change Mechanism EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-LPA-01-50 Development and manufacturing of innovative tooling for composite parts EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-LPA-01-51 Design and manufacturing of a large-scale HLFC wing model for a transonic WTT EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-LPA-01-52 Thermo-mechanical design validation of compact heat exchanger by thermal cycling life prediction EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-LPA-01-53 Compact Matrix Air Oil Heat Exchanger EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-LPA-01-54 Development of Measurement Techniques for Visualisation and Evaluation of Reverse Flow Interactions with Fan EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-LPA-01-55 Development of AC cabling technologies for >1kV aerospace applications EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-LPA-01-56 Aerospace standard Lightweight SSPC for High voltage >1kA application. EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-LPA-01-57 Innovative Power and data transfer solutions for nacelle EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-LPA-02-23 Development and execution of new test procedures for thermoplastic aircraft fuselage panels EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-LPA-02-24 Generic added structures on shells made from thermoplastic sheet material EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-LPA-02-25 Micro mechanical characteristics of a PEKK Co-consolidation / welded joint for use in thermoplastic fuselages EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-LPA-02-26 Multifunctional Aircraft Power Network with Electrical Switching EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-LPA-03-15 Pilot monitoring in service data collection EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-2018-CfP08-REG-01-16 Innovative recirculation/air treatment system. EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2018-CfP08-REG-01-17 Full scale innovative pressure bulkheads for Regional Aircraft Fuselage barrel on-ground demonstrators EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2018-CfP08-REG-02-05 High fidelity power effects aerodynamics at High Reynolds conditions in Regional turboprop configuration EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2018-CfP08-REG-03-01 Laminar Flow robustness and Load control effectiveness evaluation for a Regional Turboprop wing EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-2018-CfP08-SYS-02-46 Modeling of friction effects caused by surface contact with high pressure and rapid movement EU.3.4.5.6. ITD Systems
JTI-CS2-2018-CfP08-SYS-02-47 New grip generation for active inceptor EU.3.4.5.6. ITD Systems
JTI-CS2-2018-CfP08-SYS-02-48 Design and development of a long stroke Piezo Electric Actuator EU.3.4.5.6. ITD Systems
JTI-CS2-2018-CfP08-SYS-02-49 Health Monitoring for Electro-Hydraulic Actuator fluid EU.3.4.5.6. ITD Systems
JTI-CS2-2018-CfP08-SYS-02-50 Innovative RTM tooling for CFRP primary structural parts EU.3.4.5.6. ITD Systems
JTI-CS2-2018-CfP08-SYS-02-51 Innovative quality inspection methods for CFRP primary structural parts EU.3.4.5.6. ITD Systems
JTI-CS2-2018-CfP08-SYS-02-52 Innovative Composite Material Qualification Methodologies EU.3.4.5.6. ITD Systems
JTI-CS2-2018-CfP08-SYS-02-53 Development of an optimized DC-DC converter for a smart electrical system EU.3.4.5.6. ITD Systems
JTI-CS2-2018-CfP08-SYS-02-54 Development of a HVDC current limiter EU.3.4.5.6. ITD Systems
JTI-CS2-2018-CfP08-SYS-02-55 Air treatment system for airborne microbe removal from air circulation or chambers EU.3.4.5.6. ITD Systems
JTI-CS2-2018-CfP08-SYS-03-17 Improved Thermal Properties of Computing Platforms for Next-Generation Avionics [SAT] EU.3.4.5.6. ITD Systems
JTI-CS2-2018-CfP08-SYS-03-18 Development and testing of innovative Cr free anodic layers removal solution EU.3.4.5.6. ITD Systems
JTI-CS2-2018-CFP08-THT-01 Innovative NOx Reduction Technologies EU.3.4.5.10. Thematic Topics
JTI-CS2-2018-CFP08-THT-02 Cognitive Computing potential for cockpit operations EU.3.4.5.10. Thematic Topics
JTI-CS2-CPW-AIR-01-01 New Innovative Aircraft Configurations and Related Issues EU.3.4.5.4. ITD Airframe
JTI-CS2-CPW-AIR-01-02 Optimised Ice Protection Systems Integration in Innovative Control Surfaces EU.3.4.5.4. ITD Airframe
JTI-CS2-CPW-AIR-02-01 New Wing and Aircraft Systems Design and Integration for Turboprop Regional Aircraft EU.3.4.5.4. ITD Airframe
JTI-CS2-CPW-AIR-02-02 Out of Autoclave Composite Manufacturing, Wing and Tail Unit Components and Multifunctional Design EU.3.4.5.4. ITD Airframe
JTI-CS2-CPW-AIR-02-03 Advanced Technologies for More Affordable Composite Fuselage EU.3.4.5.4. ITD Airframe
JTI-CS2-CPW-AIR-02-04 Design and Manufacturing of an Advanced Wing Structure for Rotorcraft Additional Lift EU.3.4.5.4. ITD Airframe
JTI-CS2-CPW-ENG-01-01 Low Pressure Turbine Rear Frame (LP TRF) and Low Pressure Spool Shaft (LPS) for Ultra High Propulsive Efficiency (UHPE) Demonstrator for Short / Medium Range Aircraft (WP2) EU.3.4.5.5. ITD Engines
JTI-CS2-CPW-ENG-01-02 Power GearBox (PGB) for Ultra High Propulsive Efficiency (UHPE) Demonstrator for Short/Medium Range Aircraft EU.3.4.5.5. ITD Engines
JTI-CS2-CPW-ENG-01-03 Business Aviation / Short Regional TP demonstrator Front Power Plant Module EU.3.4.5.5. ITD Engines
JTI-CS2-CPW-ENG-02-01 Aerodynamic Design and Testing of Advanced Geared Fan Engine Modules EU.3.4.5.5. ITD Engines
JTI-CS2-CPW-ENG-02-02 LPC, ICD and TEC Development for the Next Generation Geared Fan Engines EU.3.4.5.5. ITD Engines
JTI-CS2-CPW-ENG-03-01 VHBR Engine - IP Turbine Technology EU.3.4.5.5. ITD Engines
JTI-CS2-CPW-ENG-03-02 VHBR Engine Structural Technology EU.3.4.5.5. ITD Engines
JTI-CS2-CPW-ENG-04-01 More Advanced and Efficient Small Turbine Engines for the SAT Market EU.3.4.5.5. ITD Engines
JTI-CS2-CPW-FRC-02-01 LifeRCraft Airframe - Central and Front Fuselage Sections - Design, Optimization, Manufacturing, V&V including Airworthiness Substantiation EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-CPW-FRC-02-02 LifeRCraft Drive System - Main Gear Box input modules and equipped Propeller Gear Boxes - Design, Optimization, Manufacturing, V&V including Airworthiness Substantiation EU.3.4.5.3. IADP Fast Rotorcraft
JTI-CS2-CPW-LPA-01-01 Advanced Engine and Aircraft Configurations - Strategic Complementary Research to Prepare, Develop and Conduct Large-Scale Demonstration EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-CPW-LPA-01-02 Integrated Flow Control Applied to large Civil Aircraft EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-CPW-LPA-01-03 Advanced HLFC fin design work: Structural design and manufacturing of operational HLFC fin EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-CPW-LPA-01-04 Integrated Engine Mounted Rear End Demonstrator: Component Design, Manufacturing and Test EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-CPW-LPA-01-05 PoWer Turbine of the Flight Demonstrator Contra Rotative Open Rotor (CROR) Engine EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-CPW-LPA-01-06 Rotating Frames of the Flight Demonstrator Contra Rotating Open Rotor (CROR) Engine EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-CPW-LPA-02-01 Airframe Cabin and Cargo and System integration Architecture EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-CPW-LPA-02-02 Cabin & Cargo Functional System and Operations EU.3.4.5.1. IADP Large Passenger Aircraft
JTI-CS2-CPW-REG-01-01 Development of advanced systems technologies and hardware/software for the Flight Simulator and Iron Bird ground demonstrators for regional aircraft EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-CPW-REG-01-02 Advanced wing for regional A/C - Technologies Development, Design and Manufacturing for FTB#1 EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-CPW-REG-02-01 Flight Physics and wing integration in FTB2 EU.3.4.5.2. IADP Regional Aircraft
JTI-CS2-CPW-SYS-02-01 Power Electronics and Electrical Drives EU.3.4.5.6. ITD Systems
JTI-CS2-CPW-SYS-03-01 Model, Tools, Simulation and Integration EU.3.4.5.6. ITD Systems
LC-BAT-5-2019 Research and innovation for advanced Li-ion cells (generation 3b) EU.3.4. Smart, green and integrated transport
LC-BAT-6-2019 Li-ion Cell Materials & Transport Modelling EU.3.4. Smart, green and integrated transport
LC-BAT-7-2019 Network of Li-ion cell pilot lines EU.3.4. Smart, green and integrated transport
LC-GV-01-2018 Integrated, brand-independent architectures, components and systems for next generation electrified vehicles optimised for the infrastructure EU.3.4. Smart, green and integrated transport
LC-GV-02-2018 Virtual product development and production of all types of electrified vehicles and components EU.3.4. Smart, green and integrated transport
LC-GV-03-2019 User centric charging infrastructure EU.3.4. Smart, green and integrated transport
LC-GV-04-2019 Low-emissions propulsion for long-distance trucks and coaches EU.3.4. Smart, green and integrated transport
LC-GV-05-2019 InCo flagship on “Urban mobility and sustainable electrification in large urban areas in developing and emerging economies” EU.3.4. Smart, green and integrated transport
LC-MG-1-10-2019 Logistics solutions that deal with requirements of the 'on demand economy' and for shared-connected and low-emission logistics operations EU.3.4. Smart, green and integrated transport
LC-MG-1-11-2019 Structuring R&I towards zero emission waterborne transport EU.3.4. Smart, green and integrated transport
LC-MG-1-1-2018 InCo flagship on reduction of transport impact on air quality EU.3.4. Smart, green and integrated transport
LC-MG-1-2-2018 Sustainable multi-modal inter-urban transport, regional mobility and spatial planning. EU.3.4. Smart, green and integrated transport
LC-MG-1-3-2018 Harnessing and understanding the impacts of changes in urban mobility on policy making by city-led innovation for sustainable urban mobility EU.3.4. Smart, green and integrated transport
LC-MG-1-4-2018 Hardening vehicle environmental protection systems against tampering EU.3.4. Smart, green and integrated transport
LC-MG-1-5-2019 Advancements in aerodynamics and innovative propulsion systems for quieter and greener aircrafts EU.3.4. Smart, green and integrated transport
LC-MG-1-6-2019 Aviation operations impact on climate change (InCo flagship) EU.3.4. Smart, green and integrated transport
LC-MG-1-7-2019 Future propulsion and integration: towards a hybrid/electric aircraft (InCo flagship) EU.3.4. Smart, green and integrated transport
LC-MG-1-8-2019 Retrofit Solutions and Next Generation Propulsion for Waterborne Transport EU.3.4. Smart, green and integrated transport
LC-MG-1-9-2019 Upgrading transport infrastructure in order to monitor noise and emissions EU.3.4. Smart, green and integrated transport
MG-1.10-2015 International cooperation in aeronautics with China EU.3.4. Smart, green and integrated transport
MG-1.1-2014 Competitiveness of European Aviation through cost efficiency and innovation EU.3.4. Smart, green and integrated transport
MG-1.1-2016 Reducing energy consumption and environmental impact of aviation EU.3.4. Smart, green and integrated transport
MG-1.2-2015 Enhancing resource efficiency of aviation EU.3.4. Smart, green and integrated transport
MG-1.3-2014 Seamless air mobility EU.3.4. Smart, green and integrated transport
MG-1.3-2017 Maintaining industrial leadership in aeronautics EU.3.4. Smart, green and integrated transport
MG-1.4-2014 Coordinated research and innovation actions targeting the highest levels of safety for European aviation EU.3.4. Smart, green and integrated transport
MG-1.5-2014 Breakthrough innovation for European Aviation EU.3.4. Smart, green and integrated transport
MG-1.6-2014 Improving skills and knowledge base in European Aviation EU.3.4. Smart, green and integrated transport
MG-1.7-2014 Support to European Aviation Research and Innovation Policy EU.3.4. Smart, green and integrated transport
MG-1.8-2014 International cooperation in aeronautics EU.3.4. Smart, green and integrated transport
MG-1.8-2015 International cooperation in aeronautics with Japan EU.3.4. Smart, green and integrated transport
MG-1.9-2015 International cooperation in aeronautics with Canada EU.3.4. Smart, green and integrated transport
MG-1-2-2017 Reducing aviation noise EU.3.4. Smart, green and integrated transport
MG-1-4-2016-2017 Breakthrough innovation EU.3.4. Smart, green and integrated transport
MG-1-5-2016-2017 Identification of gaps, barriers and needs in the aviation research EU.3.4. Smart, green and integrated transport
MG-2.1-2014 I²I – Intelligent Infrastructure EU.3.4. Smart, green and integrated transport
MG-2.1-2017 Innovations for energy efficiency and emission control in waterborne transport EU.3.4. Smart, green and integrated transport
MG-2.2-2014 Smart Rail Services EU.3.4. Smart, green and integrated transport
MG-2.2-2016 Development, production and use of high performance and lightweight materials for vessels and equipment EU.3.4. Smart, green and integrated transport
MG-2.3-2014 New generation of rail vehicles EU.3.4. Smart, green and integrated transport
MG-2.3-2016 New and improved transport concepts in waterborne transport EU.3.4. Smart, green and integrated transport
MG-2.4-2017 Complex and value-added specialised vessels EU.3.4. Smart, green and integrated transport
MG-2-1-2018 Human Factors in Transport Safety EU.3.4. Smart, green and integrated transport
MG-2-2-2018 Marine Accident Response EU.3.4. Smart, green and integrated transport
MG-2-3-2018 Airworthiness of mass-market drones EU.3.4. Smart, green and integrated transport
MG-2-4-2018 Coordinating national efforts in modernizing transport infrastructure and provide innovative mobility services EU.3.4. Smart, green and integrated transport
MG-2-5-2018 Innovative technologies for improving aviation safety and certification in icing conditions (InCo flagship) EU.3.4. Smart, green and integrated transport
MG-2-6-2019 Moving freight by Water: Sustainable Infrastructure and Innovative Vessels EU.3.4. Smart, green and integrated transport
MG-2-7-2019 Safety in an evolving road mobility environment EU.3.4. Smart, green and integrated transport
MG-2-8-2019 Innovative applications of drones for ensuring safety in transport EU.3.4. Smart, green and integrated transport
MG-2-9-2019 InCo Flagship on Integrated multimodal, low-emission freight transport systems and logistics EU.3.4. Smart, green and integrated transport
MG-3.1-2014 MG-3.1-2014: Technologies for low emission powertrains EU.3.4. Smart, green and integrated transport
MG-3.1-2016 Addressing aviation safety challenges EU.3.4. Smart, green and integrated transport
MG-3.2-2014 Advanced bus concepts for increased efficiency EU.3.4. Smart, green and integrated transport
MG-3.2-2017 Protection of all road users in crashes EU.3.4. Smart, green and integrated transport
MG-3.3-2014 Global competitiveness of automotive supply chain management EU.3.4. Smart, green and integrated transport
MG-3.3-2016 Safer waterborne transport and maritime operations EU.3.4. Smart, green and integrated transport
MG-3.4-2014 Traffic safety analysis and integrated approach towards the safety of Vulnerable Road Users EU.3.4. Smart, green and integrated transport
MG-3.4-2016 Transport infrastructure innovation to increase the transport system safety at modal and intermodal level (including nodes and interchanges) EU.3.4. Smart, green and integrated transport
MG-3.5-2016 Behavioural aspects for safer transport EU.3.4. Smart, green and integrated transport
MG-3.5a-2014 Cooperative ITS for safe, congestion-free and sustainable mobility EU.3.4. Smart, green and integrated transport
MG-3.5b-2014 Cooperative ITS for safe, congestion-free and sustainable mobility EU.3.4. Smart, green and integrated transport
MG-3.6-2016 Euro-African initiative on road safety and traffic management EU.3.4. Smart, green and integrated transport
MG-3.6a-2015 Safe and connected automation in road transport EU.3.4. Smart, green and integrated transport
MG-3.6b-2015 Safe and connected automation in road transport EU.3.4. Smart, green and integrated transport
MG-3-1-2018 Multidisciplinary and collaborative aircraft design tools and processes EU.3.4. Smart, green and integrated transport
MG-3-2-2018 The Autonomous Ship EU.3.4. Smart, green and integrated transport
MG-3-3-2018 Driver behaviour and acceptance of connected, cooperative and automated transport EU.3.4. Smart, green and integrated transport
MG-4.1-2014 Towards the energy efficient and emission free vessel EU.3.4. Smart, green and integrated transport
MG-4.1-2017 Increasing the take up and scale-up of innovative solutions to achieve sustainable mobility in urban areas EU.3.4. Smart, green and integrated transport
MG-4.2-2014 Safer and more efficient waterborne operations through new technologies and smarter traffic management EU.3.4. Smart, green and integrated transport
MG-4.2-2017 Supporting 'smart electric mobility' in cities EU.3.4. Smart, green and integrated transport
MG-4.3-2015 System modelling and life-cycle cost optimisation for waterborne assets EU.3.4. Smart, green and integrated transport
MG-4.3-2017 Innovative approaches for integrating urban nodes in the TEN-T core network corridors EU.3.4. Smart, green and integrated transport
MG-4.4-2014 Promoting innovation in the Inland Waterways Transport (IWT) sector EU.3.4. Smart, green and integrated transport
MG-4.4-2016 Facilitating public procurement of innovative sustainable transport and mobility solutions in urban areas EU.3.4. Smart, green and integrated transport
MG-4.5-2016 New ways of supporting development and implementation of neighbourhood-level and urban-district-level transport innovations EU.3.4. Smart, green and integrated transport
MG-4-1-2018 New regulatory frameworks to enable effective deployment of emerging technologies and business/operating models for all transport modes EU.3.4. Smart, green and integrated transport
MG-4-2-2018 Building Open Science platforms in transport research EU.3.4. Smart, green and integrated transport
MG-4-3-2018 Demographic change and participation of women in transport EU.3.4. Smart, green and integrated transport
MG-4-4-2018-2019 Support for dissemination events in the field of Transport Research EU.3.4. Smart, green and integrated transport
MG-4-5-2019 An inclusive digitally interconnected transport system meeting citizens' needs EU.3.4. Smart, green and integrated transport
MG-4-6-2019 Supporting Joint Actions on sustainable urban accessibility and connectivity EU.3.4. Smart, green and integrated transport
MG-5.1-2014 Transforming the use of conventionally fuelled vehicles in urban areas EU.3.4. Smart, green and integrated transport
MG-5.1-2016 Networked and efficient logistics clusters EU.3.4. Smart, green and integrated transport
MG-5.2-2014 Reducing impacts and costs of freight and service trips in urban areas EU.3.4. Smart, green and integrated transport
MG-5.3-2014 Tackling urban road congestion EU.3.4. Smart, green and integrated transport
MG-5.3-2016 Promoting the deployment of green transport, towards Eco-labels for logistics EU.3.4. Smart, green and integrated transport
MG-5.4-2015 Strengthening the knowledge and capacities of local authorities EU.3.4. Smart, green and integrated transport
MG-5.5a-2015 Demonstrating and testing innovative solutions for cleaner and better urban transport and mobility EU.3.4. Smart, green and integrated transport
MG-5.5b-2015 Demonstrating and testing innovative solutions for cleaner and better urban transport and mobility EU.3.4. Smart, green and integrated transport
MG-5-2-2017 Innovative ICT solutions for future logistics operations EU.3.4. Smart, green and integrated transport
MG-5-4-2017 Potential of the Physical Internet EU.3.4. Smart, green and integrated transport
MG-6.1-2014 Fostering synergies alongside the supply chain (including e.commerce) EU.3.4. Smart, green and integrated transport
MG-6.1-2016 Innovative concepts, systems and services towards 'mobility as a service' EU.3.4. Smart, green and integrated transport
MG-6.2-2014 De-stressing the supply chain EU.3.4. Smart, green and integrated transport
MG-6.2-2016 Large-scale demonstration(s) of cooperative ITS EU.3.4. Smart, green and integrated transport
MG-6.3-2015 Common communication and navigation platforms for pan-European logistics applications EU.3.4. Smart, green and integrated transport
MG-6.3-2016 Roadmap, new business models, awareness raising, support and incentives for the roll-out of ITS EU.3.4. Smart, green and integrated transport
MG-7.1-2014 Connectivity and information sharing for intelligent mobility EU.3.4. Smart, green and integrated transport
MG-7.2a-2014 Towards seamless mobility addressing fragmentation in ITS deployment in Europe EU.3.4. Smart, green and integrated transport
MG-7.2b-2014 Towards seamless mobility addressing fragmentation in ITS deployment in Europe EU.3.4. Smart, green and integrated transport
MG-7-1-2017 Resilience to extreme (natural and man-made) events EU.3.4. Smart, green and integrated transport
MG-7-2-2017 Optimisation of transport infrastructure including terminals EU.3.4. Smart, green and integrated transport
MG-7-3-2017 The Port of the future EU.3.4. Smart, green and integrated transport
MG-8.1-2016 Research, technology development and market trends for the European transport manufacturing industries EU.3.4. Smart, green and integrated transport
MG-8.1a-2014 Smarter design, construction and maintenance EU.3.4. Smart, green and integrated transport
MG-8.1b-2014 Smarter design, construction and maintenance EU.3.4. Smart, green and integrated transport
MG-8.2a-2014 Next generation transport infrastructure: resource efficient, smarter and safer EU.3.4. Smart, green and integrated transport
MG-8.2b-2014 Next generation transport infrastructure: resource efficient, smarter and safer EU.3.4. Smart, green and integrated transport
MG-8.3-2015 Facilitating market take up of innovative transport infrastructure solutions EU.3.4. Smart, green and integrated transport
MG-8.3-2016 Assessing future requirements for skills and jobs across transport modes and systems EU.3.4. Smart, green and integrated transport
MG-8.4a-2015 Smart governance, network resilience and streamlined delivery of infrastructure innovation EU.3.4. Smart, green and integrated transport
MG-8.4b-2015 Smart governance, network resilience and streamlined delivery of infrastructure innovation EU.3.4. Smart, green and integrated transport
MG-8.6-2016 Innovation awards for students and researchers in the context of the Transport Research Arena conference - TRA 2018 EU.3.4. Smart, green and integrated transport
MG-8-2-2017 Big data in Transport: Research opportunities, challenges and limitations EU.3.4. Smart, green and integrated transport
MG-8-4-2017 Improving accessibility, inclusive mobility and equity: new tools and business models for public transport in prioritised areas EU.3.4. Smart, green and integrated transport
MG-8-5-2017 Shifting paradigms: Exploring the dynamics of individual preferences, behaviours and lifestyles influencing travel and mobility choices EU.3.4. Smart, green and integrated transport
MG-8-7-2017 Future research needs and priorities in the area of transport EU.3.4. Smart, green and integrated transport
MG-8-8-2017 Support for the organisation of the Transport Research Arena 2020 Conference EU.3.4.4. Socio-economic and behavioural research and forward looking activities for policy making
MG-9.1-2015 Transport societal drivers EU.3.4. Smart, green and integrated transport
MG-9.2-2014 User behaviour and mobility patterns in the context of major societal trends EU.3.4. Smart, green and integrated transport
MG-9.3-2014 Analysis of funding schemes for transport infrastructure EU.3.4. Smart, green and integrated transport
MG-9.4-2014 Research, technology development and market prospects for the European transport industries EU.3.4. Smart, green and integrated transport
MG-9.5-2015 Fostering transnational cooperation in European transport research and innovation – NCP network EU.3.4. Smart, green and integrated transport
MG-9.6-2014 Strengthening the research and innovation strategies of the transport industries in Europe EU.3.4. Smart, green and integrated transport
MG-9.7-2014 Innovation awards for students and researchers in the context of the Transport Research Arena conference - TRA 2016 EU.3.4. Smart, green and integrated transport
MG-BG-01-2018 Unmanned and autonomous survey activities at sea: EU.3.4. Smart, green and integrated transport
MG-BG-02-2019 Ship emission control scenarios, marine environmental impact and mitigation EU.3.4. Smart, green and integrated transport
RPAS-01 SESAR UTM Concept Definition EU.3.4.7. SESAR JU
RPAS-02 Drone information management EU.3.4.7. SESAR JU
RPAS-03 Aircraft systems EU.3.4.7. SESAR JU
RPAS-04 Ground-based technology EU.3.4.7. SESAR JU
RPAS-05 Datalink EU.3.4.7. SESAR JU
RPAS-06 Security & cyber-resilience EU.3.4.7. SESAR JU
RPAS-07 Science for higher levels of automation EU.3.4.7. SESAR JU
S2R-CFM-CCA-01-2015 Start-up activities for System Platform Demonstrator Integrated Assessment and socio-economic effects EU.3.4.8.6. Cross-cutting themes and activities (CCA)
S2R-CFM-CCA-01-2017 Improving railway services for users and operators EU.3.4.8.6. Cross-cutting themes and activities (CCA)
S2R-CFM-CCA-01-2018 Virtual certification & smart planning EU.3.4.8.6. Cross-cutting themes and activities (CCA)
S2R-CFM-CCA-02-2015 Energy and sustainability, including noise and vibrations baselines assessment EU.3.4.8.6. Cross-cutting themes and activities (CCA)
S2R-CFM-CCA-03-2015 Integrated Mobility and Safety Management EU.3.4.8.6. Cross-cutting themes and activities (CCA)
S2R-CFM-IP1-01-2016 Development of concepts towards the next generation of traction systems and management of wheel/rail adhesion EU.3.4.8.1. Innovation Programme 1 (IP1): Cost-efficient and reliable trains
S2R-CFM-IP1-01-2017 Development of new technological concepts towards the next generation of rolling stock, applied to major subsystems such as Carbody, Running Gear, Brakes, Doors and Modular interiors EU.3.4.8.1. Innovation Programme 1 (IP1): Cost-efficient and reliable trains
S2R-CFM-IP1-01-2018 Development of technology demonstrators for the next generation of traction systems and adhesion management systems EU.3.4.8.1. Innovation Programme 1 (IP1): Cost-efficient and reliable trains
S2R-CFM-IP1-02-2016 Development of new technological concepts, standard specifications and architectures for train control and monitoring, with specific applications in train-to-ground communications and high safety electronic control of brakes EU.3.4.8.1. Innovation Programme 1 (IP1): Cost-efficient and reliable trains
S2R-CFM-IP1-02-2018 Implementing new technologies for the TCMS EU.3.4.8.1. Innovation Programme 1 (IP1): Cost-efficient and reliable trains
S2R-CFM-IP2-01-2015 Start-up activities for advanced signalling and automation system EU.3.4.8.2. Innovation Programme 2: Advanced traffic management and control systems
S2R-CFM-IP2-01-2017 Enhancing railway signalling systems thanks to applying satellite positioning; developing an on-board safe Train Integrity; applying formal methods approach and standardised interfaces, and enhancing Traffic Management System (TMS) functions EU.3.4.8.2. Innovation Programme 2: Advanced traffic management and control systems
S2R-CFM-IP2-01-2018 Advanced Signalling, Automation and Communication System (IP2 and IP5) EU.3.4.8.2. Innovation Programme 2: Advanced traffic management and control systems
S2R-CFM-IP3-01-2016 Research into enhanced track and switch and crossing system EU.3.4.8.3. Innovation Programme 3: Cost Efficient and Reliable High Capacity Infrastructure
S2R-CFM-IP3-01-2017 Smart system energy management solutions and future station solutions EU.3.4.8.3. Innovation Programme 3: Cost Efficient and Reliable High Capacity Infrastructure
S2R-CFM-IP3-01-2018 Research into optimized and future railway infrastructure EU.3.4.8.3. Innovation Programme 3: Cost Efficient and Reliable High Capacity Infrastructure
S2R-CFM-IP3-02-2016 Intelligent maintenance systems and strategies EU.3.4.8.3. Innovation Programme 3: Cost Efficient and Reliable High Capacity Infrastructure
S2R-CFM-IP4-01-2015 Shopping, booking and ticketing of multimodal travel solutions EU.3.4.8.4. Innovation Programme 4: IT Solutions for attractive railway services
S2R-CFM-IP4-01-2017 Technical framework for attractive railway services EU.3.4.8.4. Innovation Programme 4: IT Solutions for attractive railway services
S2R-CFM-IP4-01-2018 Passenger service platform specifications for an enhanced multi-modal transport eco-system including Mobility as a Service (MaaS) EU.3.4.8.4. Innovation Programme 4: IT Solutions for attractive railway services
S2R-CFM-IP4-02-2015 Travel companion and tracking services EU.3.4.8.4. Innovation Programme 4: IT Solutions for attractive railway services
S2R-CFM-IP4-02-2017 IP4 overall integration and demonstration EU.3.4.8.4. Innovation Programme 4: IT Solutions for attractive railway services
S2R-CFM-IP5-01-2015 Development of functional requirements for sustainable and attractive European Rail Freight EU.3.4.8.5. Innovation Programme 5: Technologies for sustainable and attractive European rail freight
S2R-CFM-IP5-01-2017 Real-time information applications and energy efficient solutions for rail freight EU.3.4.8.5. Innovation Programme 5: Technologies for sustainable and attractive European rail freight
S2R-CFM-IP5-01-2018 Technology demonstrators for competitive, intelligent rail freight operation EU.3.4.8.5. Innovation Programme 5: Technologies for sustainable and attractive European rail freight
S2R-CFM-IP5-02-2015 Start-up activities for Freight Automation EU.3.4.8.5. Innovation Programme 5: Technologies for sustainable and attractive European rail freight
S2R-CFM-IP5-03-2015 Freight Propulsion concepts EU.3.4.8.5. Innovation Programme 5: Technologies for sustainable and attractive European rail freight
S2R-OC-CCA-01-2015 Long-term needs of different actors in the railway sector EU.3.4.8.6. Cross-cutting themes and activities (CCA)
S2R-OC-CCA-01-2017 Smart maintenance and human capital EU.3.4.8.6. Cross-cutting themes and activities (CCA)
S2R-OC-CCA-02-2015 Energy usage, generation and saving approaches EU.3.4.8.6. Cross-cutting themes and activities (CCA)
S2R-OC-CCA-03-2015 Noise reduction methodologies EU.3.4.8.6. Cross-cutting themes and activities (CCA)
S2R-OC-CCA-04-2015 Safer infrastructure – improved object detection and prevention of safety critical events and integrated mobility EU.3.4.8.6. Cross-cutting themes and activities (CCA)
S2R-OC-IP1-01-2016 Tools and methodologies supporting the development of next generation traction systems, and brakes EU.3.4.8.1. Innovation Programme 1 (IP1): Cost-efficient and reliable trains
S2R-OC-IP1-01-2017 Innovative materials & modular design for rolling stock applications EU.3.4.8.1. Innovation Programme 1 (IP1): Cost-efficient and reliable trains
S2R-OC-IP1-01-2018 Technical solutions for the next generation of TCMS EU.3.4.8.1. Innovation Programme 1 (IP1): Cost-efficient and reliable trains
S2R-OC-IP1-02-2016 Technology feasibility studies supporting the development of next generation TCMS, and safe control for brakes EU.3.4.8.1. Innovation Programme 1 (IP1): Cost-efficient and reliable trains
S2R-OC-IP1-02-2017 Tools, methodologies and technological development of the next generation of Running Gear EU.3.4.8.1. Innovation Programme 1 (IP1): Cost-efficient and reliable trains
S2R-OC-IP2-01-2015 Threat detection and profile protection definition for cyber-security assessment EU.3.4.8.2. Innovation Programme 2: Advanced traffic management and control systems
S2R-OC-IP2-01-2017 Operational conditions of the signalling and automation systems; signalling system hazard analysis and GNSS SIS characterization along with Formal Method application in railway field EU.3.4.8.2. Innovation Programme 2: Advanced traffic management and control systems
S2R-OC-IP2-01-2018 Analysis for Moving Block and implementation of Virtual Coupling concept EU.3.4.8.2. Innovation Programme 2: Advanced traffic management and control systems
S2R-OC-IP2-02-2015 IT virtualization of testing environment EU.3.4.8.2. Innovation Programme 2: Advanced traffic management and control systems
S2R-OC-IP2-02-2017 Energy harvesting methodologies for trackside and on-board signalling and communication devices. Adaptation of already existing technologies for developing a purely on-board Train Integrity EU.3.4.8.2. Innovation Programme 2: Advanced traffic management and control systems
S2R-OC-IP2-02-2018 Modern methodologies and verifications for GNSS in Railways and virtual test environment EU.3.4.8.2. Innovation Programme 2: Advanced traffic management and control systems
S2R-OC-IP2-03-2015 Technical specifications for a new Adaptable Communication system for all Railways. EU.3.4.8.2. Innovation Programme 2: Advanced traffic management and control systems
S2R-OC-IP2-03-2018 Communication environment assessment and validation EU.3.4.8.2. Innovation Programme 2: Advanced traffic management and control systems
S2R-OC-IP3-01-2016 Research into new radical ways of changing trains between tracks EU.3.4.8.3. Innovation Programme 3: Cost Efficient and Reliable High Capacity Infrastructure
S2R-OC-IP3-01-2017 Smart metering and asset management of railway systems EU.3.4.8.3. Innovation Programme 3: Cost Efficient and Reliable High Capacity Infrastructure
S2R-OC-IP3-01-2018 Measuring and monitoring devices for railway assets EU.3.4.8.3. Innovation Programme 3: Cost Efficient and Reliable High Capacity Infrastructure
S2R-OC-IP3-02-2017 Future stations and accessibility (IP1 and IP3) EU.3.4.8.3. Innovation Programme 3: Cost Efficient and Reliable High Capacity Infrastructure
S2R-OC-IP3-02-2017 Future stations and accessibility (IP1 and IP3) EU.3.4.8.1. Innovation Programme 1 (IP1): Cost-efficient and reliable trains
S2R-OC-IP3-03-2017 Satellite and autonomous monitoring systems’ solution EU.3.4.8.3. Innovation Programme 3: Cost Efficient and Reliable High Capacity Infrastructure
S2R-OC-IP4-01-2016 Interoperability Framework governance, ensuring its market uptake and sustainability EU.3.4.8.4. Innovation Programme 4: IT Solutions for attractive railway services
S2R-OC-IP4-01-2017 Smart technologies for improved travel companion and trip tracking EU.3.4.8.4. Innovation Programme 4: IT Solutions for attractive railway services
S2R-OC-IP4-01-2018 Semantic framework for multimodal transport services EU.3.4.8.4. Innovation Programme 4: IT Solutions for attractive railway services
S2R-OC-IP4-02-2016 Interoperability Framework Converters EU.3.4.8.4. Innovation Programme 4: IT Solutions for attractive railway services
S2R-OC-IP4-02-2018 Supporting the implementation of the IP4 multi-modal transport ecosystem EU.3.4.8.4. Innovation Programme 4: IT Solutions for attractive railway services
S2R-OC-IP5-01-2015 Freight Automation on lines and in yards EU.3.4.8.5. Innovation Programme 5: Technologies for sustainable and attractive European rail freight
S2R-OC-IP5-01-2017 Real-time yard and network management EU.3.4.8.5. Innovation Programme 5: Technologies for sustainable and attractive European rail freight
S2R-OC-IP5-01-2018 Radio communication and simulation of train dynamics for Distributed Power within long trains EU.3.4.8.5. Innovation Programme 5: Technologies for sustainable and attractive European rail freight
S2R-OC-IP5-02-2015 Improved vehicle/train dynamics EU.3.4.8.5. Innovation Programme 5: Technologies for sustainable and attractive European rail freight
S2R-OC-IP5-03-2015 Intelligent freight wagon with predictive maintenance EU.3.4.8.5. Innovation Programme 5: Technologies for sustainable and attractive European rail freight
S2R-OC-IPX-01-2018 Paradigm shifts for railway EU.3.4.8. Shift2Rail JU
S2R-OC-IPX-02-2018 Transversal exploratory research activities and knowledge transfer EU.3.4.8. Shift2Rail JU
S2R-OC-IPX-03-2018 Innovative/breakthrough mobility concepts (with rail as backbone) EU.3.4.8. Shift2Rail JU
SESAR.IR-VLD.Wave1-01-2015 Content Integration EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-02-2015 Master Plan Maintenance EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-03-2015 Validation and Demonstration Engineering EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-04-2015 Increased Runway and Airport Throughput EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-05-2015 Integrated Surface Management EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-06-2015 Airport Safety Nets EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-07-2015 Total Airport Management EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-08-2015 Remote Tower for Multiple Airports EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-09-2015 Optimised Airspace Users Operations EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-10-2015 Advanced Airspace Management EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-11-2015 Advanced DCB EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-12-2015 Enhanced Arrivals and Departures EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-13-2015 Trajectory Based Free Routing EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-14-2015 Separation Management En-Route and TMA EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-15-2015 Enhanced Air and Ground Safety Nets EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-16-2015 Air Vehicle Systems EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-17-2015 CNS EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-18-2015 Common Services EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-19-2015 CWP - HMI EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-20-2015 SWIM Infrastructures EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-21-2015 4D Trajectory Management EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-22-2015 Integrated Airport Operations (incl. TBS) EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-23-2015 Network Collaborative Management EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-24-2015 Flexible Airspace Management and Free Route EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-25-2015 Arrival Management extended to en-route Airspace EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-26-2015 Enhanced Terminal Airspace using RNP-Based Operations EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-27-2015 Initial Trajectory Information Sharing EU.3.4.7. SESAR JU
SESAR.IR-VLD.Wave1-28-2015 Flight Information Exchange EU.3.4.7. SESAR JU
Sesar-01-2015 Automation in ATM EU.3.4.7.1 Exploratory Research
Sesar-02-2015 Data Science in ATM EU.3.4.7.1 Exploratory Research
Sesar-03-2015 Information Management in ATM EU.3.4.7.1 Exploratory Research
Sesar-04-2015 Environment and Meteorology in ATM EU.3.4.7.1 Exploratory Research
Sesar-05-2015 Economics and Legal Change in ATM EU.3.4.7.1 Exploratory Research
Sesar-06-2015 High Performing Airport Operations EU.3.4.7.1 Exploratory Research
Sesar-07-2015 Separation Management and Separation Standards EU.3.4.7.1 Exploratory Research
Sesar-08-2015 Communication,Navigation and Surveillance (CNS) EU.3.4.7.1 Exploratory Research
Sesar-09-2015 Trajectory Based Operations (TBO) EU.3.4.7.1 Exploratory Research
Sesar-10-2015 ATM Architecture EU.3.4.7.1 Exploratory Research
Sesar-11-2015 ATM Performance EU.3.4.7.1 Exploratory Research
SESAR-ER3-01-2016 Knowledge Transfer Network (KTN) EU.3.4.7. SESAR JU
SESAR-ER3-02-2016 Advanced Air Traffic Services: Separation Management EU.3.4.7. SESAR JU
SESAR-ER3-03-2016 Optimised ATM Network Services: TBO EU.3.4.7. SESAR JU
SESAR-ER3-04-2016 Enabling Aviation Infrastructure: CNS for General Aviation EU.3.4.7. SESAR JU
SESAR-ER3-05-2016 Enabling Aviation Infrastructure: CNS EU.3.4.7. SESAR JU
SESAR-ER3-06-2016 ATM Operations, Architecture, Performance and Validation EU.3.4.7. SESAR JU
SESAR-VLD1-01-2016 Arrival Management Extended to En-route airspace EU.3.4.7. SESAR JU
SESAR-VLD1-02-2016 Integrated Airport EU.3.4.7. SESAR JU
SESAR-VLD1-03-2016 Network collaborative Management EU.3.4.7. SESAR JU
SESAR-VLD1-04-2016 Initial Trajectory Information sharing EU.3.4.7. SESAR JU
SESAR-VLD1-05-2016 Efficient services and infrastructure delivery EU.3.4.7. SESAR JU
SESAR-VLD1-06-2016 Increased access to airports for low visibility mixed fleet operations EU.3.4.7. SESAR JU
SESAR-VLD1-07-2016 Applications for trajectory based and queue management using EPP extended into oceanic/intercontinental operations: inter-continental trajectory based operations enabled by Satellite based CNS EU.3.4.7. SESAR JU
SESAR-VLD1-08-2016 Applications for improved flight trajectories using SWIM B2B services EU.3.4.7. SESAR JU
SESAR-VLD1-09-2016 Solutions for General Aviation and Rotorcraft EU.3.4.7. SESAR JU
SESAR-VLD1-10-2016 Safe integration of drones EU.3.4.7. SESAR JU
SMEInst-10-2016-2017 Small business innovation research for Transport and Smart Cities Mobility EU.3.4. Smart, green and integrated transport